Traverse Beam Robot
The traverse beam robot is applicable to all types of horizontal injection machine of 50~450T for take-out products .
The installation direction is different from traditional take out robot, products and sprues are placed at the end of IMM. It has single stage and telescopic type; It can be added a sub-arm for 3-plates mold to grip products and sprue at the same time.Vacuum circuit, grip circuit and standard suction assembly.
The traverse stroke driven by servo motor,vertical stroke and kick stroke driven by pneumatic or servo motor .Traverse axle , kick stroke and vertical arm are applied with advanced high rigidity linear slide rail, and light high rigidity alloy aluminum extrusion beam for crosswise and vertical axles to integrating with linear slide rail, it works with high speed, high efficiency, low vibration, and long use life.Telescopic type with special double-speed belt structure quicken vertical speed, it can be applicable to low workshop.
—Crosswise/Vertical remote adjustment: Position adjusted by remote control, saved adjustment time and enhanced safety of operation.
—Spraying device: spraying number of molds and spraying time of each spray can be set. The nozzle can be installed on the arm or mould. Up to two groups of settings.
—Middle mold Inspection: Detecting position of the middle mold platen of 3-plates mold.
—Photoelectric inspection on finished products: Placing products on the conveyor, so as to avoid hitting each other.
—Air Nipper: It can be installed on the arm or at the end of traverse for cutting sprue.
—CE models are available, conformity with EUROMAP and SPI standard, enclosed standard connect interface.
—Support Chinese & English switch,User-Friendly ,8.0 inch full-color touch screen and function keys with open source software.
—Quality design features sturdy, responsive push buttons and a highly durable keypad.
—Quick response of picture conversion enables fast operation.
—Allows users to easily program their own positions, timers, and motion speeds.
—Whith multiple CPU control, system response quick, high precision of motion control and 0.1mm positioning accuracy.
—Stack, user teachings, Electric adjustment.
—Extensive protective functions, automatic detection machine running situation, timely display failure alarm and fault cause, ensure the safety of the machine.
—High speed I/O transmission technology enables the traverse robot to run faster and shorten the cycle time by more than 10%.
—Allows you choose from 20 pre-programmed sequences,Or easily build and memory storage for up to 80 mold set-ups for later recall.
—Simple pick-and-place module for picker.
—Increase the take out robot alarm information and the memory function of taking out time, convenient user view the robot operation history.
—Have a USB port,the parameters, sequences can be imported and exported from different servo robot through U disk. Easy to adjust, use,and can be upgraded through it.
—IMM and Robot Emergency Stop function.
|IMM Range||Traverse Stroke||Vertical Stroke||Kick Stroke||Weight|
|30-450 (ton)||2000-4000 mm||650-1000 mm||150-300 mm||250-400 KG|
|Take-Out Times||Cycle Times||Maximum Load||Drive System||Control System|
|2.0-2.5 S||20-25 S||5-8 KG||Servo Motor||HC-S3|
|Working Air Pressure||Air Consumption||Power Consumption||Power Supply|
|0.5-0.8 (MPa)||20 -25(Nl/cycle)||1.0-1.5 (KVA)||120-240 VAC 1 Phase 60Hz Or 480 VAC 3 Phase 60Hz|