/HC850HT-2Axis Servo Traverse Robot
HC850HT-2Axis Servo Traverse Robot 2018-05-26T19:32:44+00:00

Project Description

The high speed robot move at high speed with a 0.4 S take out times! It is specially designed for fast food box, disposable knife and fork, etc ,Which require high speed injection molding.
HC850HT-2Axis Servo Traverse Robot

0.4S Take Out Times! High Speed, Good Repeatability

Increase the injection efficiency of 10-30%;

Reduce workers and payroll costs.

HC850HT-2Axis Servo Traverse Robot
Space-saving , robust design and have a excellent price performance.It is precise, with a good repeatability, highly dependability and requires low mainte-nance.In addition, the robot is very easy to operate,thanks to the user-friendly Simple Pick-and-Place programming via the HC-S2 control system.
Product Application:
—The take out robot is suitable for 150-250 ton horizontal injection molding machine.
—Payload capacity of 3 kg.
—Take out parts from 2-plate mold.
—90 Deg Wrist Rotation for parts multi-point placement or stacking on belts.
—Low ceiling requirements.
—Applicable to take-out products with short forming cycle or complex automatic.
The fastest take out robot move at high speed with a 0.4 S take out times! It is specially designed for fast food box, disposable knife and fork, etc ,Which require high speed injection molding.
Standard Configuration :
—Single Arm and Telescopic arm.
—Wrist Rotation at 90°.
—Vacuum circuit, grip circuit and standard suction assembly.
—Control System:HC-S2, 3.5-inch color screen.
—Traverse Robot With 2 Axis Servo.
—Traverse Stroke Driven By servo motor.
—Vertical Stroke Driven By servo motor.
—Kick Stroke Driven By Pneumatic.
—2 axis synchronized movement can plan a variety of complex take-out paths.
—Reliable and high performance modular mechanical design.
—The high speed robot with oil system to increase lubrication,improve the life of the slider rail,and its circuit board, drive circuit, brake resistor isolated installation, not affect each other, conducive to heat.
—Traverse Beam is a high strength, thick walled, Aluminum tubing with precision machined surface provide maximum rigidity and durability with high precision robot position.
—The vertical arms are stiff but light weight rib rein-forced aluminum profiles, Minimizes all moving masses for the highest acceleration and deceleration.
—Telescoping arm for faster cycle times and low ceiling requirements.
—Allows users to easily adjust their own positions, timers, and motion speeds.
The vertical stroke and kick stroke can be set to any desired length.
The take-out waiting position of the chuck can be manually set to any desired position.
—Sprue gripper with control sensor.
—External output point, control conveyor belt or spray device, etc.
—Locking cylinder prevents the main arm from drifting into the mold area in the event of pressurized air loss.
—Compact Picker mounted control cabinet.
—Smooth operation with lowest noise.
—CE models are available, conformity with EUROMAP and SPI standard, enclosed standard connect interface. 
IMM RangeTraverse Stroke Vertical Stroke Kick StrokeWeight
150-250 (ton)1200mm850 mm300 mm180 KG
Take-Out TimesCycle Times           Maximum LoadDrive SystemControl System
0.4 S2.97 S3 KGServo Motor and PneumaticHC-S2
Working Air PressureAir ConsumptionPower ConsumptionPower Supply
0.5-0.8 (MPa)5 (Nl/cycle)1.7 (KVA)120-240 VAC 1 Phase 60Hz Or 480 VAC 3 Phase 60Hz
Control System S2 for Traverse Robot3.5-inch color screen controller:HC-S2
—Support Chinese & English switch, easy to operate,icon-based menu panels are user-friendly and easy to navigate.
—Quality design features sturdy, responsive push buttons and a highly durable keypad.
—Allows users to easily program their own positions, timers, and motion speeds.
—High-Performance 32-bit DSP processor.
—High speed I/O transmission technology enables the traverse robot to run faster and shorten the cycle time by more than 10%.
—Allows you choose from 20 pre-programmed sequences,Or easily build and memory storage for up to 80 mold set-ups for later recall.
—Simple pick-and-place module for picker.
—Increase the take out robot alarm information and the memory function of taking out time, convenient user view the robot operation history.
—Have a USB port,the parameters, sequences can be imported and exported from different servo robot through U disk. Easy to adjust, use,and can be upgraded through it.
—IMM and Robot Emergency Stop function.

We will answer your email shortly!

Choose the injection molding machine tonnage